Posts Tagged ‘paper lanterns’

diy project: sculptural paper orb lights

Tuesday, May 1st, 2012

I found this great diy project via Design Sponge. It is inexpensive, creative and the results are simply fabulous! I will be making my own this weekend, so excited! =)

Materials

  • 100–125  white standard-sized paper cupcake liners
  • 100–125  vertically striped petit fours papers
  • (1) 18–20″ white paper lantern
  • hot glue gun
  • 1 Hemma Cord from IKEA (for lighting) ($3.99)

Instructions

1. Assemble the lantern and place it top up in a wide, shallow bowl to act as a base.

2. Put a small dot of hot glue on the backside of a white cupcake liner. Starting about 1/2″ in from the wire ring at the top of the lantern, place the cupcake liner on the lantern and press until it is attached.

3. Continue around the ring, spacing the papers so that the circular bases are approximately 1″ apart, allowing the outer edges to merge and shape.

4. Apply the cupcake papers around the lantern in rings until you are 3/4 of the way down, and then flip the lantern over and gently place it back in the bowl, top side down.

5. Complete the underside, and fill in the bottom so that the papers cover the base opening.

6. Begin applying the petite fours papers, centering them inside each white paper. Three-quarters of the way up the lantern, flip it top side up. Complete the top side.

7. Go back through, gently manipulating the outer papers to the desired shape. I kept mine fairly organic.

8. Drop a light in, and voila!

  • Share/Bookmark